How to drill a hole in a workpiece

• 1.     Measure workpiece by using a steel ruler.

• 2.     Mark workpiece by using centre punch.

• 3.     Place workpiece on drill vice.

• 4.     Place lever of drill vice onto marked position on workpiece that is to be drilled.

• 5.     Tighten drill vice.

• 6.     Insert drill bit into drill chuck.

• 7.     Tighten drill bit.

• 8.     Switch on machine.

• 9.     Pull lever down slowly onto workpiece.

• 10.   Oil workpiece to reduce friction.

• 11.    Turn off machine after drilling is completed.

• 12.Remove workpiece and clean drill vice.